Menü überspringen
HEIDENHAIN Rotary encoders without integral bearing

Link

Rotary encoder without integral bearing

In addition to the system accuracy, the mounting and adjustment of the scanning head normally have a significant effect on the accuracy that can be achieved with rotary encoders without integral bearings. Of particular importance are the mounting eccentricity and radial runout of the measured shaft.

The inductive rotary encoders ECI/EQI 1300 are mechanically compatible with the photoelectric encoders ExN 1300: the shaft is fastened with a central screw. The stator of the encoder is clamped by an axially tightened screw in the location hole.

The photoelectric ERO modular rotary encoders from HEIDENHAIN consists of a graduated disk with hub and a scanning unit. They are particularly well suited for limited installation space or for applications for which there must be no friction.
 

Modell 

Egenskaper 

ECI/EQI 1100

  • Påbuggnadskompatibel med ECN/EQN 1100
  • Ensidig hålaxel D 6 mm

ECI/EQI 1300

  • Mekaniskt kompatibel med ECN/EQN 1300
  • Konaxel eller ensidig hålaxel

ERO 1200

  • Kompaktmodell
  • För axeldiametrar upp till 12 mm

ERO 1400

  • Miniaturized modular rotary encoder for measured shafts up to 8 mm
  • Specialinbyggd monteringshjälp
  • Meds skyddskåpa

ECI/EBI 100

  • Inductive absolute rotary encoders
  • Flange for axis mounting
  • Hollow through shaft
  • Multiturn function via battery-buffered revolution counter